Meter Setup
71
Result memory
Result memory settings allow to apply a Result Display Filter and to set the Result Storage Mode
(see page 73).
All results recorded by the meter (patient results and quality controls) are stored automatically.
Use the Sel. Res. Display Filter menu to select whether to display results (when calling up the
Memory function) for all existing tests or only those from the current operator.
1 From the Main Menu, touch Setup to
open the meter settings.
2 From the Setup menu, touch Data
Handling .
3 From the Setup-Data Handling menu,
touch Result Memory.
Main Menu
Control Test
Review Results
Setup
Patient Test
09:15 am
04/19/2016
Data Handling
ID Setup
Lockout
Basics
Optional Screens
Setup
04/19/2016
Result Memory
Result Units
Result Display Mode
Setup - Data Handling
Connection
04/19/2016
Diagnostics
To Next Page
Loading...