cobas h 232 - Result Display Mode

Meter Setup
78
Result display mode
Test results may be displayed either with a static or a flashing display, the latter visually indicat-
ing that the measurement process has been finished. Once a result is available, the display starts
flashing. Depending on the settings, this may be either a quantitative or qualitative result screen
or an operator login screen.
1 From the Main Menu, touch Setup to
open the meter settings.
2 From the Setup menu, touch Data
Handling.
3 From the Setup-Data Handling menu,
touch Result Display Mode.
Main Menu
Control Test
Review Results
Setup
Patient Test
09:15 am
04/19/2016
Data Handling
ID Setup
Lockout
Basics
Optional Screens
Setup
04/19/2016
Result Memory
Result Units
Result Display Mode
Setup - Data Handling
Connection
04/19/2016
Diagnostics