Control Testing and Quality Control
144
5.2 Performing a quality control test
Quality control (QC)
1 Power the meter on by pressing the
button.
You can also power on the meter directly by
connecting the power adapter or by placing
the meter on the Handheld Base Unit.
Depending on the system settings the opera-
tor my have to log in and/or enter a password.
Follow the procedures as described on
page 124.
2 Wait until the main menu is displayed.
Main Menu
Control Test
Review Results
Setup
Patient Test
QC!
09:15 am
04/19/2016
To Next Page
Loading...