Software
Copyright © 2015 Coda Octopus Products Ltd
90
F180R MOTION Sensor User and Reference Guide
The F180R System is fixing its
GPS position. This state is
usually seen after a Heading
Initialisation.
There are not enough GPS
satellites in view for the F180R
System to operate. At least 4
satellites are required.
An external GNSS is used as a
primary position provider, but
no position is received from
the external GNSS.
The F180R System has
detected a fault condition.
Further information should
appear in the form of message
popups.
Double clicking the Status LED will display the Graphical QC dialog.
To Next Page
Loading...