128
For OS X prior to 10.9:
Be sure that the StackShot 3X controller is not plugged into your computer. OS X installations
require that the FTDI drivers be installed first. You can download these drivers in the above link
in section “11 - Installing the Reflash software”. There will be two versions of the FTDI drivers.
There is one version for 10.3, and then the other for 10.4+. Be sure to install the 10.4+ version.
For OS X 10.9 (Mavericks) or higher:
Apple as of their Mavericks release has decided to include the FTDI driver natively. This may
cause incompatibility with some products but will work with the StackShot 3X controller and
Reflash program.
Once installation completes you will have a “Reflash” icon on your Launch Pad:
Note: You will have to reboot your computer to finish the USB driver installation.
To Next Page
Loading...