66
So what happens if you want to just change the start and end points now? Do you have to go
through all of that over again? No! The next time you press “Helper” you will see:
If you choose “New Profile” you will start from the beginning of the helper screen like above. If,
however, you press “Change Start/Stop” you will just be asked for the new start and end
positions – skipping the rest of the questions. That speeds things up if you run the motion
profile or do a preview and find something is just a bit off – you can easily change it here.
7.3.2 Shoot-Move-Shoot
The helper for “Shoot-Move-Shoot” is nearly identical to the real-time video helper with the
exception of a few questions at the beginning:
To Next Page
Loading...