Cognisys STACKSHOT 3X - Cleaning and Care; Cleaning; Care and Storage

8
2.1 Cleaning and Care
We want your StackShot 3X to last – so here are some brief steps to keep your controller
happy!
2.1.1 Cleaning
For cleaning the display first use a dry micro-fiber cloth. If that doesn’t remove debris or
smudges you can use a slightly dampened (not wet) micro-fiber cloth. It must not be wet
enough to cause water to leak around the edge of the display. Do not spray water directly
onto the controller. Any liquid that goes into the controller may cause an electrical failure
of the device. Do not use a flammable liquid or cleaning agent on the controller – just a
micro-fiber cloth (dampened, only if needed).
2.1.2 Care and storage
StackShot 3X is a precision piece of electronics. It’s designed to handle normal wear and
tear but there are some things to avoid:
 Do not get the unit wet.
 Do not drop the unit (the display cover, much like a cell-phone, is made of glass)
 Protect the unit’s display when packing up your gear. If a rotary table fights the
display on the controller – the rotary table will win.