87
8. Settings
There are several settings that can be adjusted in the StackShot 3X controller to suit your
specific needs. To see or change the settings press the “Settings” icon:
There are several pages of settings. You can scroll through the settings using the Up/down
arrows:
To adjust the settings simply touch the display when you see the setting you need to adjust.
The available settings are discussed below.
8.1 Global Mode
This is the current mode for StackShot 3X. The different modes are discussed in the section “4 -
Changing Operating Modes”.
8.2 Axis settings
Each axis can have its own unique settings for its function (rail, slider, or rotary table), speed,
settle time, etc. Specific axis settings are discussed in section “9 - Axis Settings”.
8.3 Load/Save Settings
From this menu you can load settings, save settings, or load the factory default settings. There
are eight available “slots” for storing and retrieving your settings.
To Next Page
Loading...