ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
188
Subgroup: HMI Settings
Setpoint group Basic settings Related FW 1.9.0
Range [units] RPM/PF/Run Hours/ATT/AIN1 [-]
Default value PF Alternative config NO
Step [-]
Comm object 13346 Related applications AMF, MRS
Config level Advanced
Setpoint visibility Always
Description
This setpoint adjusts line 1 on Mains screen.
Main Screen Line 1
6 back to List of setpoints
Setpoint group Basic settings Related FW 1.9.0
Range [units] RPM/PF/Run Hours/ATT/AIN1 [-]
Default value RPM Alternative config NO
Step [-]
Comm object 14628 Related applications AMF, MRS
Config level Advanced
Setpoint visibility Always
Description
This setpoint adjusts line 2 on Mains screen.
Main Screen Line 2
6 back to List of setpoints
Group: Engine settings
Subgroup: Starting

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65