Condair CP3 - Page 68

68
Unit component What to clean and how to clean
Drain pump
O-ring
pump wheel
• Useabrushtoremoveanylimscalefromthepumphous-
ingandthepumpwheel(donotuseawirebrush).
• Then,wipepumpwheelwithadampcloth.Washthe
pump housing withalukewarmsoapsolutionandrinse
well with tap water.
Cylinder receptacle in the unit
• Removeanylimscalefromthecylinderreceptacleandits
connectorsusingabrush(donotuseawirebrush).
• Wash the cylinder receptacle with a lukewarm soap
solution and rinse well with tap water.
Water cup
• Removeanylimscalefromthewatercupanditscon-
nectorsusingabrush(donotuseawirebrush).
• Washthewatercupwithalukewarmsoapsolutionand
rinse well with tap water.
Interior of the unit
(water side only)
Wipetheinterioroftheunitwithadampclothwithoutusing
any cleaning agent.
CAUTION!
Takecarethattheelectricalconnectionsand
the electronic components remain dry.