Condair CP3 - 5 Mounting and installation work; 5.1 Important notes for mounting and installation work

24
5 Mounting and installation work
Qualicationofpersonnel
Allmountingandinstallationworkmustbecarriedoutonlybywellqualiedpersonnelauthorised
by the owner.Itistheowner’sresponsibilitytoverifyproperqualicationofthepersonnel.
General note
Strictlyobserveandcomplywithallinformationgiveninthepresentinstallationandoperatinginstruc-
tionsregardingthelocationoftheunitandtheinstallationofwater,steamandelectricity.
Observe and comply with all local regulations dealing with water, steam and electrical installations.
Safety
Someinstallationworkrequiresremovaloftheunitcover.Pleasenotethefollowing:
DANGER!
Danger of electrical shock!
Youmaygetintouchwithlivepartswhentheunitisopen.Thesteamhumidiermustbeconnected
tothemainsonlyafterallmountingandinstallationworkhasbeencompletedandthecoverhas
been relocated properly.
CAUTION!
The electronic components
insidethehumidierarevery sensitive to electrostatic discharge.
Whentheunitisopenforinstallationwork,appropriatemeasuresmustbetakentoprotectthese
componentsagainstdamagecausedbyelectrostaticdischarge(ESDprotection).
5.1 Important notes for mounting and installation work