Scanner Setup 8
Lifting the scanner
Taking care
The scanner rests on four rubber feet positioned on the underside of
the scanner.
1. CAUTION. The scanner is heavy (35kg/77lbs). Never attempt to
lift the scanner on your own. Always seek the help of a second
person when lifting the scanner from its packaging material or
when you want to move the unit.
2. Find a sturdy table or surface on which to use the scanner.
3. The sides of the table or surface must be easily accessible by
those installing the scanner so as to avoid possible back injury
when lowering and maneuvering the scanner into position.
4. The small height of the scanner feet means that the case of the
scanner rests close to the surface it used on. This is a potential
finger trap when lowering the scanner into position.
TAKE CARE NOT TO TRAP YOUR FINGERS WHEN
PLACING THE SCANNER!
SEE THE SAFETY INSTRUCTIONS AT THE END OF THIS
OPERATOR GUIDE
3
To Next Page
Loading...
