Glossary
72
Glossary of Terms (continued)
Ramp Time – The period of time it takes a dimmer to go from Off to fully bright (or its preset level), or from
fully bright (or its preset level) to off.
Replace– A function used for replacing a non-function device and keep the device in the RF network.
Replicate (Replication) – A function used to transfer the information stored in the Primary Controller to a
secondary controller (Table-Top to Hand Held or to USB stick for control of network by software).
Remove – A function used for removing a non-function device or a device that you want to remove from the
network.
Reset – A function for resetting the controller back to factory setting.
Scene – A group of lights set to react together to a single command. A scene might turn some devices on,
others off and still others may dim to a preset level.
Secondary Controller – Another controller to which all information has been transferred except the Primary
Controllers ID information. Secondary controllers are capable of all functions except adding devices to the network.
Transfer to WDC – A feature for transferring scenes from a primary controller to a 5 button Scene Controller
(RFWDC).
Version– Use for checking the Software revision, Node ID, Home ID and protocol of the controller or devices..
Uninstall (Also referred to as “Exclusion”) – Process used to remove (exclude) devices into the Z-Wave
network.
Who Are You – Function used to quickly identify what the Node ID of a device is, what its name is and what
location it is listed under in the controller.
To Next Page
Loading...