Create and Control Events
41
Create an Event
An event is a scheduled one-time or recurring program that automatically controls a scene. You can
program your controllers to create and control up to 32 events in your home. Example: If you plan on
watching your favorite movie, an Event can be set to start a Scene you have created for watching
movies.
After reviewing this section, you will be able to perform the following basic functions:
• Create an Event • Rename an Event
• Activate and Deactivate an Event • Delete an Event
• Activate or Deactivate All Events • Edit an Event
1. Select the “Create” option from the Events
menu. Press the OK button.
2. Using the arrow pad, enter a name for the
event.
• To use one of the system’s pre-
programmed event names, press the up
arrow and scroll through the options until
you find the desired name. You can also
use the right arrow to scroll to the end of
the pre-programmed name and add
additional characters or remove part of the
name. Press the OK button to save.
• If you want another name, press the down
arrow once. Scroll through the alphabet
until you find the first letter of the name.
When the letter appears, press the right
arrow and continue the process until the
name is spelled out. Press the OK button
to save.
To Next Page
Loading...
Need help?
General