• Once you are in the time settings, the
hour number will be flashing slowly. Use
the up and down arrows to select the
correct hour, then use the right arrow to
proceed to the next hour, then to minutes,
then select AM or PM. Press the OK
button to save. Note: To enter 8:30 PM
the user must enter 08:30 PM
Create an Event (continued)
• To select the day, highlight “Day” and
press the OK button.
• Use the up and down arrows to scroll and
highlight the day of the week, Everyday,
Weekdays, or Weekend and press the OK
button.
3. Scroll through the menu to view the setting
options for the event: Time, Day, Type,
Scene, and Active.
• To select the time, highlight “Time” and
press the OK button.
To Next Page
Loading...