Spider DSA User’s Manual
128
Channel Status Window: displays the status with parameters for all channels.
Run Log Window: shows a log of test events as they occur.
Digital IO Window: displays the current state of the digital inputs and outputs.
RMS, Peak, Peak-Peak, and Mean values can be shown for signal attributes.
Figure 84: Attributes of Signal Display
When the “Display EU after this number” option is enabled, the engineering unit
is also displayed with the number in the numeric display.
Channel Status Window: shows the current state of each input channel. Both
bar graphs, which show the current overall voltage level and numerical readings
are shown.
Figure 85: Channel Status Window
To Next Page
Loading...