Spider DSA User’s Manual
147
• when test just finished
• when average number is reached
• save 3D signals when test aborts
• every___seconds
• Frame Number: the results of the given number of frames
• when limit is exceeded
• when triggered
• Enable a timer when continue after trigger: save with the timer
enabled after a run is triggered to start
Options only available in Sine reduction:
Software saves the results
• when sweeping direction changes
When the software saves results to PC, results include
• Signals
• Screenshot of the active signal window
• Screenshots of all signal windows
• Screenshots of the software
In the File name options area, Record and Save file name prefixes may be
defined separately and differentiated.
By checking the box, “Allow specify file name and save location before
manually click save”, when the user click Save button to manually save signals,
the EDM will ask for the file name and location before the signals are saved.
Figure 104. File Name and Location for Saved Signals
To Next Page
Loading...