Spider DSA User’s Manual
257
Channel Status Window: shows the current state of each input channel. Both
bar graphs which show the current overall voltage level and numerical readings
are shown.
Figure 170: Channel Status Window
Run Log Window: shows a log of test events as they occur.
System Graph Window: displays the topology of networked Spider units and
their system information such as hardware type, IP address, SN, and running
status.
Digital IO Window: displays the current state of the digital inputs and outputs.
Save Window as User Defined: saves current window with user defined
name and this saved window can be recalled from View tab.
Rename This Window: changes the name of the current window.
Close This Window: closes the current window.
Close Other Windows: closes all other windows except the current window.
RMS, Peak, Peak-Peak, and Mean values can be shown for signal attributes.
To Next Page
Loading...