Spider DSA User’s Manual
298
Figure 204: Measured signals setup – Order Tracks initial setup
Click on the Add Signal button on the top to start configuring the required Order
Track signals.
Figure 205: Adding complex order track signals
Select the Channel for which an order needs to be measured and select an
Order Value. The Order value can also be a decimal number which tracks, for
e.g., 1.5 order of channel 1. Click on Add to add the order tracked signal.
The Upper portion of this page, shows the Signal Name. The default name of
each signal has the form, OTRK_OrderValue(Channel Number).
Multiple orders for a single channel and multiple orders for multiple channels can
be added at the same time by selecting the channel, entering the order value and
To Next Page
Loading...