Spider DSA User’s Manual
97
correction mode, energy factor, amplitude factor, acquisition/calculation method,
amplitude scaling, averaging mode, lin/exp averaging time constant, and number
of averages. These settings only apply to ASCII, MatLab and Excel CSV data
export formats.
Spectrum Format defines the default spectrum format when Auto Power
Spectrum data is exported.
Figure 49: Spectrum Format Setting
MAT-File Preference defines attributes for the MatLab file export format.
Separator Setting allows the user to choose specific symbols using as the
separators to conform with local standards or user’s preferences. These separators
include decimal separator, CVS file list separator, and digit grouping separator.
Default Display Format defines the default display format of the frequency
spectrum. These settings will be used when a new display window is created in
EDM.
Working Folder sets the default working folders for program files and data
storage.
Engineering Units sets the engineering units used globally in EDM. The
engineering unit display setting does not affect the actual values of the signals,
only how they are displayed and labeled. This setting can be different from the
To Next Page
Loading...