Spider DSA User’s Manual
98
setting on the devices from which the data was acquired. For example, an
acceleration signal can be acquired in “g” on CoCo while displayed in “m/s
2
” here.
Plot Properties define how the time values, signal lines, numeric values, grids,
and markers are displayed in the display windows where signals are plotted.
Time Signal AVD Setting stands for Acceleration Velocity Displacement. It is a
set of filters used in the signal display interface when the AVD signal display
conversion is in progress. It is for filtering the data when integrating or
differentiating. The AVD setting can eliminate some aliasing at a certain
frequency, and it can make the time stream display more smoothly with reduced
disturbance.
Mail Setting defines how EDM sends email per Event Action Rules. SMTP
server address, port number, encryption type, and authentication parameters are
specified as required. The Spider hardware (only version 7.x) is also equipped
with a send email function that can be used when the email server doesn’t require
SSL encryption. Sending email through the hardware is not always available when
SSL encryption is required. This feature enables sending emails in Black Box
mode. The origin of email, either from the Spider hardware or the EDM, can be
chosen from the Event Action Rules.
Figure 50: Mail Setting Setup
Appearance has options for the color scheme of the interface, for displaying the
start window, and for enabling tool tips.
To Next Page
Loading...