Cupra TERRAMAR 2024 - Page 148

146
Air conditioning
Temperature

Climatronic control
Fig.109 Schematic representation: air-
conditioning functions.
A
Climabar
Fixed bar at the bottom of the Infotainment
System screen ›››Fig.109
A
where the fol-
lowing Air Conditioning functions are located:
Tapping on the same numbers
opens a pop-up window for temperature
settings using the symbols or .
OR: use the touch zones
1
and
2
(blue /
red) to adjust the temperature of the Air
Conditioning ›››Fig.109.
Click on the symbol to change the heat
setting. To turn o the heating, press
the button until the light level is o. It
can also be controlled via the main Seats
menu ›››page150.
OR: the seat heating can be controlled by
tapping with two ngers at once on touch
zones
1
(for driver) and
2
(for passen-
ger)
1)
.
The defrost/demist function of the Cli-
matronic removes ice and condensation
from the windscreen. The air is dehu-
midied and the fan is set high.
When this function is switched on, the rear
air conditioning remains switched o.
By pressing it, you can access the Air
conditioning menu ›››page147.
Switches the heated window on or o
when the drive system is switched on.
It switches o automatically after a maxi-
mum of 10 minutes. It should be switched
o as soon as the glass is demisted. To
avoid possible damage to the battery, an
automatic temporary disconnection of this
function is possible, coming back on when
normal operating conditions are re-estab-
lished.
Favourites
1)
With the exception of temperatures, seat
heating, , and , all other buttons on
the Climabar are customisable:
1.
Press and hold the button that you want to
congure. A box showing all the possible
options drops down.
2. Select one of these options. The button
will be congured with this option.
3.
Close the box to return to the infotainment
menu.