DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
98
Multicast Static FDB Settings
Users can set up multicast forwarding on the Switch.
To view this window, click L2 Features > FDB > Static FDB Settings > Multicast Static FDB Settings, as shown
below:
Figure 4- 38 Multicast Static FDB Settings window
The fields that can be configured are described below:
Parameter Description
VID
The VLAN ID of the VLAN the corresponding MAC address belongs to.
Multicast MAC
Address
The static destination MAC address of the multicast packets. This must be a multicast MAC
address.
Port
Allows the selection of ports that will be members of the static multicast group and ports that
are either forbidden from joining dynamically, or that can join the multic
dynamically, using GMRP. The options are:
None - No restrictions on the port dynamically joining the multicast group. When None is
chosen, the port will not be a member of the Static Multicast Group.
Egress - The port is a static member of the multicast group.
Click Apply to implement changes made.
To Next Page
Loading...
