DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
59
Telnet Settings
Telnet configuration is enabled by default. If you do not want to allow configuration of the system through Telnet
choose Disabled. The TCP ports are numbered between 1 and 65535. The "well-known" TCP port for the Telnet
protocol is 23.
To view this window, click Management > Telnet Settings, as shown below:
Figure 3- 37 Telnet Settings window
Web Settings
Web-based management is enabled by default. If you choose to disable this by selecting Disabled, you will lose the
ability to configure the system through the Web interface as soon as these settings are applied.
To view this window, click Management > Web Settings, as shown below:
Figure 3- 38 Web Settings window
To Next Page
Loading...
