D-Link DGS-3700-12 - Port Configuration

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
16
System Information Settings
This window contains the System Information details. The user may enter a System Name, System Location and
System Contact to aid in defining the Switch, to the user's preference. This window displays the MAC Address,
Firmware Version and Hardware Version.
To view this window, click System Configuration > System Information Settings, as shown below:
Figure 2- 2 System Information Settings window
The fields that can be configured are described below:
Parameter Description
System Name
Enter a system name for the Switch, if so desired. This name will identify it in the Switch
network.
System Location
Enter the location of the Switch, if so desired.
System Contact
Enter a contact name for the Switch, if so desired.
Click Apply to implement changes made.
Dual Configuration Settings
The following window is used to configure firmware information set in the Switch. The DGS-3700 Series has the
capability to store two firmware images in its memory.
To access this window, click System Configuration > Dual Configuration Settings, as shown below:
Figure 2- 3 Dual Configuration Settings window
This window displays the following information:
Parameter Description
ID
States the ID number of the configuration file located in the Switch’s memory. The Switch can