DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
150
802.1p Settings
The 802.1p Settings section includes 802.1p Default Priority Settings, 802.1p User Priority Settings, and 802.1p Map
Settings.
802.1p Default Priority Settings
The Switch allows the assignment of a default 802.1p priority to each port on the Switch.
To view this window, click QoS > 802.1p Settings > 802.1p Default Priority Settings, as shown below:
Figure 6- 2 802.1p Default Priority Settings window
This window allows you to assign a default 802.1p priority to any given port on the Switch. Priority values are
numbered from 0, the lowest priority, to 7, the highest priority. Click Apply to implement your settings.
The following parameters can be set or are displayed:
Parameter Description
From Port/To Port
A consecutive group of ports may be configured starting with the selected port.
Priority Select a priority level between 0 and 7 to be applied on the selected ports.
Click Apply to set the changes.
To Next Page
Loading...
