DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
259
DHCP Server Manual Binding
An address binding is a mapping between the IP address and MAC address of a client. The IP address of a client can
be assigned manually by an administrator or assigned automatically from a pool by a DHCP server. The dynamic
binding entry will be created when an IP address is assigned to the client from the pool network’s address.
To view this window, click Network Application > DHCP > DHCP Server > DHCP Server Manual Binding, as
shown below:
Figure 9- 11 DHCP Server Manual Binding window
The fields that can be configured are described below:
Parameter Description
Pool Name
Enter the DHCP Server Pool name.
IP Address
IP address which will be assigned to specified client.
Hardware Address
Enter the hardware address.
Type
Either Ethernet or IEEE802 can be specified.
DHCP Server Dynamic Binding
To view this window, click Network Application > DHCP > DHCP Server > DHCP Server Dynamic Binding, as
shown below:
Figure 9- 12 DHCP Server Dynamic Binding window
The fields that can be configured are described below:
Parameter Description
Pool Name
Enter the DHCP Server Pool name.
To Next Page
Loading...
