DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
112
Querier, which will not send out Multicast Listener Query Messages.
Click Apply to implement any changes made and <<Back to return to the MLD Snooping Settings window. To
modify the router port settings, click the hyperlinked Modify Router Port
as shown below:
Figure 4- 55 MLD Snooping Router Port Settings – Modify window
MLD Snooping Rate Limit Settings
This window is used to configure the rate of MLD control packets that are allowed per port or per VLAN.
To view this window, click L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Rate Limit
Settings, as shown below:
Figure 4- 56 MLD Snooping Rate Limit Settings window
The following parameters may be viewed or modified:
Parameter Description
Port List
Specifies a port or range ports to configure or display.
VLAN List
Specifies a VLAN or range of VLANs to configure or display.
Rate Limit
Specifies the rate of MLD control packets that the Switch can process on a specific port or
VLAN. The rate, between 1 and 1000, is specified in packets per second. The packet that
exceeds the limited rate will be dropped. The default setting is No Limit.
Click Apply to implement new changes. To modify the rate limit click the corresponding Edit button.
To Next Page
Loading...
