D-Link DGS-3700-12 - IGMP Snooping Group

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
107
IGMP Snooping Group
Users can view the Switch’s IGMP Snooping Group Table. IGMP Snooping allows the Switch to read the Multicast
Group IP address and the corresponding MAC address from IGMP packets that pass through the Switch.
To view this window, click L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Group, as
shown below:
Figure 4- 49 IGMP Snooping Group window
The user may search the IGMP Snooping Group Table by VLAN Name, VID List, or Port List. Click the appropriate
radio button, fill in the corresponding field in the top left hand corner, and then click Find.
The fields that can be configured are described below:
Parameter Description
VLAN Name
The VLAN Name of the multicast group.
VID List
The VID List of the multicast group.
Port List
The ports of the multicast group.
Group IPv4
Address
Enter the IPv4 address.
Data Driven
Tick this check box to enable the data driven feature.
Clear Date Driven
Click this button to delete the designated IGMP snooping groups learned by the data driven
feature.
Clear All Data
Driven
Click this button to delete all the IGMP snooping groups learned by the data driven feature.
Click Apply to implement changes made.