DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
68
802.1Q VLAN Settings
This window lists all previously configured VLANs by VLAN ID and VLAN Name.
To view this window, click L2 Features > VLAN > 802.1Q VLAN Settings as shown below:
Figure 4- 5 802.1Q VLAN Settings window
To create a new 802.1Q VLAN entry or edit an existing one, click the Add/Edit VLAN tab at the top of the 802.1Q
VLAN Settings window. A new window will appear, as shown below, to configure the port settings and to assign a
unique name and number to the new VLAN. See the table below for a description of the parameters in the new
window.
NOTE: After all IP interfaces are set for your configurations, VLANs on the
switch can be routed without any additional steps.
To Next Page
Loading...
