DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
122
Figure 4- 75 IPv4 Limited Multicast Range Settings window
To add a new range enter the information and click Add, to delete an entry enter the information and click Delete.
IPv4 Max Multicast Group Settings
This window allows users to configure the ports on the switch that will be apart of the maximum number of multicast
groups that can be learned by data driven.
To view this window, click L2 Features > Multicast Filtering > IPv4 Multicast Filtering > IPv4 Max Multicast Group
Settings, as shown below:
Figure 4- 76 IPv4 Max Multicast Group Settings window
To add a new IPv 4 Max Multicast Group, enter the information and click Apply. To search for an entry, click Find.
IPv6 Multicast Filtering
The IPv6 Multicast Filtering section includes IPv6 Multicast Profile Settings, IPv6 Limited Multicast Range Settings,
and IPv6 Max Multicast Group Settings.
IPv6 Multicast Profile Settings
This window allows the user to add a profile to which multicast IPv6 address(es) reports are to be received on
specified ports or VLANs on the Switch. This function will therefore limit the number of reports received and the
number of multicast groups configured on the Switch. The user may set an IP Multicast address or range of IPv6
Multicast addresses to accept reports (Permit) or deny reports (Deny) coming into the specified switch ports or
VLANs.
To view this window, click L2 Features > Multicast Filtering > IPv6 Multicast Filtering > IPv6 Multicast Profile
Settings, as shown below:
To Next Page
Loading...
