D-Link DGS-3700-12 - P Map Settings

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
152
802.1p Map Settings
This window is used to enable 802.1p Map Settings.
To view this window, click QoS > 802.1p Settings > 802.1p Map Settings, as shown below:
Figure 6- 4 802.1p Map Settings window
The following parameters may be set:
Parameter Description
From Port/To Port
Select a consecutive group of ports to be configured.
Priority List (0-7)
Enter a source priority of incoming packets.
Color Specify the color Red, Yellow or Green.
Click Apply to implement changes.