DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
100
MAC Address Aging Time Settings
Users can configure the MAC Address aging time on the Switch.
To view this window, click L2 Features > FDB > MAC Address Aging Time Settings, as shown below:
Figure 4- 40 MAC Address Aging Time Settings window
The fields that can be configured are described below:
Parameter Description
MAC Address Aging
Time (10-1000000)
This field specifies the length of time a learned MAC Address will remain in the forwarding
table without being accessed (that is, how long a learned MAC Address is allowed to remain
idle). To change this option, type in a different value representing the MAC address’ age-out
time in seconds. The MAC Address Aging Time can be set to any value between 10 and
1000000 seconds. The default setting is 300 seconds.
Click Apply to implement changes made.
To Next Page
Loading...
