D-Link DGS-3700-12 - DNS Relay Static Settings

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
263
Parameter Description
DNS Relay State
Enable or disable the DNS relay state.
Primary Name Server
Enter the primary DNS server IP address.
Secondary Name
Server
Enter the secondary DNS server IP address.
DNS Relay Cache
State
Enable or disable the DNS relay cache state.
Click Apply to implement changes made.
DNS Relay Static Settings
To view this window, click Network Application > DNS > DNS Relay > DNS Relay Static Settings as shown below:
Figure 9- 18 DNS Relay Static Settings window
The fields that can be configured are described below:
Parameter Description
Domain Name
Enter the domain name.
IP Address
Enter the DNS Relay IP Address.
Click Apply to implement changes made.
SNTP
SNTP or Simple Network Time Protocol is used by the Switch to synchronize the clock of the computer.
SNTP Settings
Users can configure the time settings for the Switch.
To view this window, click Network Application > SNTP > SNTP Settings, as shown below: