DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
174
The user can enter a specific UDP Source Port Mask or UDP Destination Port Mask.
IPv6 Address IPv6 Source Address – Enter an IPv6 address to be used as the source address mask.
IPv6 Destination Address – Enter an IPv6 address that will be used as the destination
address mask.
NOTE: At any one time the user can only choose IPv6 class and
IPv6 Flow Label together or IPv6 Address by itself.
Click Apply to implement changes made.
Click Create to view the new Access Profile List entry in the Access Profile List window shown below. To add
another Access Profile, click Add ACL Profile. To delete a profile, click the corresponding Delete button. To view the
specific configurations for an entry, click the Show Details button. To add a rule to the Access Profile entry, click the
Add/View Rules button.
Figure 7- 18 Access Profile List window (IPv6)
To view the configurations for previously configured entries, click on the corresponding Show Details button, which
will display the following window:
Figure 7- 19 Access Profile Detail Information window (IPv6)
To return to the Access Profile List window, click Show All Profiles. To add a rule to a previously configured entry,
click on the corresponding Add/View Rules. This will reveal the following window:
To Next Page
Loading...
