DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
176
class field is a part of the packet header that is similar to the Type of Service (ToS) or
Precedence bits field in IPv4.
Time Range Name
Tick the check box and enter the name of the Time Range settings that has been previously
configured in the Time Range Settings window. This will set specific times when this
access rule will be implemented on the Switch.
Counter
Enable or disable the counter settings.
Ports
Specifies that the access rule will take effect on one port or a range of ports.
VLAN Name
Specifies the access rule will take effect on the VLAN Name specified.
VLAN ID
Specifies the access rule will take effect on the VLAN ID specified.
Click Apply to display the following Access Rule List window.
Figure 7- 21 Access Rule List window (IPv6)
To view the configurations for previously configured rules, click on the corresponding Show Details button, which will
display the following Access Rule Details window:
Figure 7- 22 Access Rule Detail Information window (IPv6)
To configure the Packet Content ACL, select Packet Content in the Add ACL Profile window, enter the Profile ID and
Profile Name into the top half of the screen and then click Select. The following window will appear:
To Next Page
Loading...
