DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
189
Figure 7- 43 CPU Access Rule Detail Information window (IPv4)
To establish the rule for a previously created CPU Access Profile:
To configure the Access Rules for IP, open the CPU Access Profile List window and click Add/View Rules for an
IPv6 entry. This will open the following window:
Figure 7- 44 CPU Access Rule List window (IPv6)
To remove a previously created rule, click the corresponding Delete Rules button. To add a new Access Rule, click
the Add Rule button:
Figure 7- 45 Add CPU Access Rule window (IPv6)
To set the Access Rule for IPv6, adjust the following parameters and click Apply.
Parameter Description
Access ID (1-100) Enter a unique identifier number for this access. This value can be set from 1 to 100.
Action Select Permit to specify that the packets that match the access profile are forwarded by the
To Next Page
Loading...
