DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
236
Figure 8- 48 Authentication Server Group Settings window
The Switch has four built-in Authentication Server Groups that cannot be removed but can be modified. To modify a
particular group, click on its corresponding Edit button or click the Edit Server Group tab at the top of this window,
the following screen will be displayed.
Figure 8- 49 Authentication Server Group Settings (Edit) window
To add an Authentication Server Host to the list, enter its IP address in the IP Address field, choose the protocol
associated with the IP address of the Authentication Server Host and click Add to add this Authentication Server Host
to the group.
NOTE: The user must configure Authentication Server Hosts using the Authentication
Server Hosts window before adding hosts to the list. Authentication Server Hosts must be
configured for their specific protocol on a remote centralized server before this function
can work properly.
To Next Page
Loading...
