DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
31
To view this window, click System Configuration > User Accounts Settings, as shown below:
Figure 2- 24 User Accounts Settings window
The following fields can be set:
Parameter Description
User Name
The name of the user, an alphanumeric string of up to 15 characters.
Access Right There are three levels of user privileges, Admin, Operator and User. Some menu selections
available to users with Admin privileges may not be available to those with User or Operator level
privileges.
There are three levels of security offered on the Switch, the Operator level privilege will allow
users to configure and view configurations on the Switch, except for those involving security
features, which are still left to the Admin level privilege. Operator level users can be authenticated
through either the local authentication method of the Switch, or through the Access Authentication
Control feature, discussed later in this document. Once the user has logged in to the Switch in the
Operator level, certain security screens and windows will not be made available to view, or to
configure. Only Admin level users have access to these features.
(Table 2 - 1 below summarizes Admin, Operator, and User level privileges)
New Password
Enter a password for the new user.
Confirm New
Password
Retype the new password.
To add a new user, enter the appropriate information and click Apply. To delete an account click the corresponding
Delete button. To modify an existing user account, click Edit as shown below.
Figure 2- 25 User Accounts Settings (Edit) window
Enter the Old Password for the account, the New Password you wish to use, and retype the new password in the
Confirm Password field. Use the drop-down menu to select the type of encryption (Default, Plain Text or Sha 1), and
click Apply.
To Next Page
Loading...
