DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
71
Figure 4- 8 802.1Q VLAN Settings window – Find VLAN tab
To create a VLAN Batch entry click the VLAN Batch Settings tab at the top of the window. The following window will
open:
Figure 4- 9 802.1Q VLAN Settings window – VLAN Batch Settings tab
The following fields can be set in the VLAN Batch Settings tab:
Parameter Description
VID List (e.g 2-5)
Enter a VLAN ID List that can be added, deleted or configured.
Advertisement
Enabling this function will allow the Switch to send out GVRP packets to outside sources,
notifying that they may join the existing VLAN.
Port List (e.g. 1-5)
Allows an individual port list to be added or deleted as a member of the VLAN.
Tagged
Specifies the port as 802.1Q tagged. Checking the box will designate the port as tagged.
Untagged
Specifies the port as 802.1Q untagged. Checking the box will designate the port as untagged.
To Next Page
Loading...
