D-Link DWS-3160-24TC - Page 163

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
159
15-1 enable captive_portal
Description
This command is used to enable the Captive Portal operation on the Switch.
Format
enable captive_portal
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To enable the Captive Portal:
DWS-3160-24PC:admin#enable captive_portal
Command: enable captive_portal
Success.
DWS-3160-24PC:admin#
15-2 disable captive_portal
Description
This command is used to disable the Captive Portal operation on the Switch.
Format
disable captive_portal
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To disable the Captive Portal: