D-Link DWS-3160-24TC - Page 561

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
557
Example
To display the scheduling mechanism for ports 1 to 5:
DWS-3160-24PC:admin#show scheduling_mechanism 1-5
Command: show scheduling_mechanism 1-5
Port Mode
----- ------
1 Strict
2 Strict
3 Strict
4 Strict
5 Strict
DWS-3160-24PC:admin#
59-9 config 802.1p user_priority
Description
This command is used to map the 802.1p user priority of an incoming packet to one of the eight
hardware queues available on the Switch.
Format
config 802.1p user_priority <priority 0-7> <class_id 0-7>
Parameters
<priority 0-7>
- The 802.1p user priority you want to associate with the <class_id> (the number
of the hardware queue) with.
<class_id 0-7> - The number of the Switch’s hardware priority queue. The Switch has 8
hardware priority queues available. They are numbered between 0 (the lowest priority) and 7
(the highest priority).
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the 802.1p user priority:
DWS-3160-24PC:admin#config 802.1p user_priority 1 3
Command: config 802.1p user_priority 1 3
Success.
DWS-3160-24PC:admin#