D-Link DWS-3160-24TC - Page 562

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
558
59-10 show 802.1p user_priority
Description
This command is used to display the 802.1p user priority for ports.
Format
show 802.1p user_priority
Parameters
None.
Restrictions
None.
Example
To display the 802.1p user priority:
DWS-3160-24PC:admin#show 802.1p user_priority
Command: show 802.1p user_priority
QOS Class of Traffic
Priority-0 -> <Class-2>
Priority-1 -> <Class-3>
Priority-2 -> <Class-1>
Priority-3 -> <Class-3>
Priority-4 -> <Class-4>
Priority-5 -> <Class-5>
Priority-6 -> <Class-6>
Priority-7 -> <Class-7>
DWS-3160-24PC:admin#
59-11 config 802.1p default_priority
Description
This command is used to configure the 802.1p default priority settings on the Switch. If an
untagged packet is received by the Switch, the priority configured with this command will be written
to the packet’s priority field.
Format
config 802.1p default_priority [<portlist> | all] <priority 0-7>