Command: show wireless known_client
MAC Address Name Action
----------------- -------------------------------- ----------------
00-18-DE-D7-B4-C1 reception deny
Total Entries : 1
95-39 show wireless mac_authentication_mode
Description
This command is used to display the configured client MAC authentication mode for the Switch.
If the global MAC Authentication action is configured as “White List”, then any wireless clients with
MAC addresses that are specified in the known client list (local or RADIUS), and are not explicitly
denied access, are granted access. If a MAC address is not in the list, then access to this client is
denied.
If the global MAC Authentication action is configured as “Black List”, then any wireless clients with
MAC addresses that are specified in the known client list (local or RADIUS), and are not explicitly
granted access, are denied access. If a MAC address is not in the list, then access to this client is
granted.
Format
show wireless mac_authentication_mode
Parameters
None.
Restrictions
None.
Example
T o display the configured client MAC authentication mode for the Switch: