DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
902
95-40 show wireless multicast tx_rates
Description
This command is used to display the multicast transmit rates valid for a specified physical mode.
This is intended to help the user to determine valid values for the radio configuration command.
Format
show wireless multicast tx_rates [a | bg]
Parameters
a - Specifies that multicast TX rates of the physical mode, 802.11a, will be displayed.
bg - Specifies that multicast TX rates of the physical mode, 802.11b/g, will be displayed.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To display multicast TX rates of the physical mode, 802.11a:
DWS-3160-24PC:admin#show wireless multicast tx_rates a
Command: show wireless multicast tx_rates a
Mode : 802.11a
Valid Rates (Mbps)
------------------
6 Mbps
9 Mbps
12 Mbps
18 Mbps
24 Mbps
36 Mbps
48 Mbps
54 Mbps
DWS-3160-24PC:admin#
To display multicast TX rates of the physical mode, 802.11b/g:
To Next Page
Loading...
