D-Link DWS-3160-24TC - Page 976

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
972
Attribute
Description
Range
Usage
Default
User-Name (1)
Ethernet Address of
the client station.
Valid Ethernet MAC
Address.
Required
None
User-Password (2)
A fixed password used
to lookup an client
MAC entry.
“NOPASSWORD”
Required
None
Vendor-Specific (26),
D-Link (171),
MAC-Authentication-
Action (114)
Flag indicating what
action to take if MAC
authentication is
enabled on the
network.
0-Global Action
1-Grant Access
2-Deny Access
Optional
0
Vendor-Specifc (26),
D-Link (171),
Client-Nickname (115)
Descriptive Name of
the client.
0-32 Character String
Optional
“”
Tunnel-Type (64) For dynamic VLAN
usage.
VLAN (13) Optional
Tunnel-Medium-Type
(65)
For dynamic VLAN
usage.
802
Optional
Tunnel-Private-Group-
ID (81)
For dynamic VLAN
usage.
VLANID
Optional
If the global MAC Authentication action is configured as “White List”, then any wireless clients with
MAC addresses that are specified in the list, and are not explicitly denied access, are granted
access. If MAC address is not in the list, then the access to the client is denied.
If the global MAC Authentication action is configured as “Black List”, then any wireless clients with
MAC addresses that are specified in the list, and are not explicitly granted access, are denied
access. If MAC address is not in the list, then the access to the client is granted.
The following table indicates the RADIUS attributes that are used to configure Captive Portal users.
The table indicates both RADIUS attributes and vendor specific attributes (VSA) that are used to
configure Captive Portal.
Captive Portal RADIUS Attributes:
Attribute
Description
Range
Usage
Default
User-Name (1)
User name to be
authorized
1-32 characters
Required
None
User-Password (2)
User password
8-64 characters
Required
None
Session-Timeout (27)
Logout once session
timeout is reached
(seconds). If the
attribute is 0 or not
present, then use the
value configured for
the Captive Portal.
Integer (seconds)
Optional
86400
Idle-Timeout (28)
Logout once idle
timeout is reached
(seconds). If the
Integer (seconds)
Optional
0