D-Link DWS-3160-24TC - Page 977

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
973
attribute is 0 or not
present, then use the
value configured for
the Captive Portal.
Vendor-Specific (26),
WISPr (14122),
WISPr-Bandwidth-Max-
Down (8)
Maximum client
receive rate (b/s).
Limits the bandwidth at
which the client can
receive data from the
network. If the attribute
is 0 or not present,
then use the value
configured for the
Captive Portal.
Integer
Optional
0
Vendor-Specific (26),
WISPr (14122),
WISPr-Bandwidth-Max-
Up (7)
Maximum client
transmit rate (b/s).
Limits the bandwidth at
which the client can
send data into the
network. If the attribute
is 0 or not present,
then use the value
configured for the
Captive Portal.
Integer
Optional
0
Vendor-Specific (26),
D-Link (171),
LVL7-Max-Input-Octets
(124)
Maximum number of
octets the user is
allowed to transmit.
After this limit has
been reached the user
will be disconnected. If
the attribute is 0 or not
present, then use the
value configured for
the Captive Portal.
Integer
Optional
0
Vendor-Specific (26),
D-Link (171),
LVL7-Max-Output-
Octets (125)
Maximum number of
octets the user is
allowed to receive.
After this limit has
been reached the user
will be disconnected. If
the attribute is 0 or not
present, then use the
value configured for
the Captive Portal.
Integer
Optional
0
Vendor-Specific (26),
D-Link (171),
LVL7-Max-Total-Octets
(126)
Maximum number of
octets the user is
allowed to transfer
(sum of octets
transmitted and
received). After this
limit has been reached
the user will be
disconnected. If the
attribute is 0 or not
present, then use the
value configured for
the Captive Portal.
Integer Optional 0