To Next Page

To Previous Page

Local Configurations 39

The parameters might be different depending on the model you purchased.

Shortcut menu

Figure 4-21

 View layout: Configure the live view screen to a single-channel layout, 4-channel layout,

8-channel layout, 9-channel layout, or 16-channel layout. Different model supports different

view layout mode.

 PTZ: Open the PTZ interface. For details, see "4.2.2 PTZ control panel."

 Color Setting: Open the color setting interface where you can adjust the video image color.

For details, see "4.3.1.1 Configuring Image Color."

 Search: Open the playback interface where you can search and play back record files or

pictures.

 Record: Open the record interface. For details, see "4.1.7 Configuring Record Settings."

 Remote Device: Search and add a remote device.

 Alarm Out: Open the alarm out interface where you can configure the alarm output type.

For details, see "4.3.4.4 Configuring Alarm Output Settings."

 Alarm: View the alarm status of each channel.

 Device: Open the device information display interface. For details, see "4.4.2.2 Viewing

Device Information."

 Zero-Ch Encode: Open the zero-channel encode interface. For details, see "4.2.1.4.3

Configuring Zero-Channel Settings."

 Main Menu: Open Main Menu interface.

After entering the main menu interface, right-clicking on the screen can return to the previous

interface.

4.2.1.4 Live View Display

You can configure the display effect, tour settings, and zero-channel settings.

Dahua MCVR6204 User Manual

Questions and Answers: