Dahua XVR5104HS User Manual

373
Figure 4- 100
Note

If there is no HDD, system max supports 1024 logs.

If you have connected to the unformatted HDD, system max supports 5000 logs.

If you have connected to the formatted HDD, system max supports 500,000 logs.

System operation logs are saved in system memory. Other types of logs are saved in
the HDD. If there is no HDD, other types of logs are saved in the system memory too.

The logs are safe when you format the HDD. But the logs may become loss once you
removed the HDD.
4.9 Setting
4.9.1 Camera
4.9.1.1 Remote Device (For digital channel only)
4.9.1.1.1Remote Device
In the main menu, from Camera ->Registration, you can go to Registration interface. Here
you can add/delete remote device and view its corresponding information.
Refer to chapter 4.1.4.4 Registration for detailed information.
4.9.1.1.2Channel Status
Here you can view the IPC status of the corresponding channel such as motion detect,
video loss, tampering, alarm and etc. See Figure 4- 101.

Dahua XVR5104HS Specifications

General

Video Compression	H.265+/H.265/H.264+/H.264
Audio Input/Output	1/1, RCA
Video Output	1 HDMI, 1 VGA
Network Interface	1 RJ-45 Port (100M)
Main Processor	Embedded Processor
Operating System	Embedded LINUX
Bit Rate	32Kbps ~ 6144Kbps per channel
Operating Temperature	-10°C ~ +55°C (+14°F ~ +131°F)
IP Video Input	4+2 channel, each channel up to 6MP
Analog Video Input	4 channel, BNC
USB Interface	2x USB 2.0
HDD	1 SATA port, up to 6TB
Dimensions	260mm x 236mm x 48mm
HDCVI Camera Input	4 channels
AHD Camera Input	4 channels
TVI Camera Input	4 channels
Operating Humidity	10% ~ 90%
Resolution	1080N, 720p, 960H, D1, CIF
Record Rate	Up to 25/30fps