Myzone 3 12:00PM 01 Jan 2021
SYSTEM ZONES AC UNIT OPTIONS
Airflow/Temp
Hide Actual Temp
Damper Timing
Reverse Dampers
Open Dampers When AC off
Skip Zone Ports
Auto
Hide Induct Temp
98
System Options
Press here to hide the actual temp
from the end users view
Press here to hide the actual temp
from the end users view
Press here to show Set Temp
and Actual Temp in the zone
summary menu instead of Set
Temp and Airflow
Press here to adjust the Damper
timing from Auto to Manual. (Only
activate this option with Siemens
or Belimo Damper Motors).
Press here to reverse the
polarity of all zone motors
connected to the system.
Press here to activate this function
Press here and then select
a zone port to skip. Can be
utilised if there is a faulty port.
Select the faulty port
and move all zones to
the next consecutive port.
To Next Page
Loading...
